High Power(23dbm) Multi-Client Bridge/Access Point-NL-2611CB3 PLUS (Deluxe)
The Wireless Multi-Client Bridge/Access Point operates in the 2.4 GHz
frequency spectrum supporting the 802.11b (2.4GHz, 11Mbps) wireless standard.
Its the best way to add wireless capability to your existing wired network, or
to add bandwidth to your wireless installation.
To protect your wireless connectivity, it can encrypt all wireless transmissions
through 64/128-bit WEP data encryption. The MAC address filter lets you select
exactly which stations should have access to your network. With the Wireless
Multi-Client Bridge/Access Point, you willl experience the best wireless
connectivity available today.
*Product Features :
Features |
Benefits |
Up to 23dBm(200mW) RF Output Power |
Up to 9 times coverage of Regular Multi-Client
Bridge |
11Mbps IEEE 802.11b Compliant |
Fully Interoperable with IEEE 802.11b
Compliant |
Point-to-point, Point-to-multipoint Wireless
Connectivity |
Let users transfer data between two buildings
or multiple buildings |
Plug and Play |
No driver needed, easy and quick to connect
your Ethernet device to Wireless |
Power-over-Ethernet |
Flexible Access Point locations and cost
savings |
64 /128-bit WEP data encryption |
Powerful data security |
Hide SSID (AP Mode) |
Avoids unallowable users sharing bandwidth,
increases efficiency of the network |
DHCP Client |
Simplifies network administration |
Web-based configuration |
Helps administrators to remotely configure or
manage the Multi-Client Bridge with web browser |
MAC address filtering (AP Mode) |
Ensures secure network connection |
Seamless Roaming |
Allows users to travel between APs without
losing their network connection |
|
| |
* Specifications:
General |
|
Data Transfer Rate |
11, 5.5, 2 and 1 Mbps, Auto Fall-Back |
Frequency Band |
2.400~2.484 GHz |
Range (open environment) |
11 Mbps -300m/450m (23 dBm output power)
5.5 Mbps -400m/600m (23 dBm output power)
2 Mbps -500m/750m ( 23 dBm output power)
1 Mbps -800m/1200m (23 dBm output power) |
Radio type |
Direct Sequence Spread Spectrum (DSSS) |
Operation Channels |
11 for North America, 14 for Japan,13 for
Europe, 2 for Spain, 4 for France |
Modulation |
11 Mbps / 5.5 Mbps CCK
2 Mbps: DQPSK
1 Mbps: DBPSK |
RF Connector |
TNC Female-Reverse |
RF Output Power |
23dBm(200mW)-FCC
20dBm(100mW)-CE |
WEP data encryption |
64/128-bit |
Compatibility |
IEEE 802.11b compliant |
Regulation Certifications |
FCC Part 15/UL, ETSI 300/328/CE |
Power Supply |
12V DC/ 1A |
|
Network
|
|
Topology |
Point-to-Point/ Point-to-Multipoint/
Infrastructure |
Interface |
One 10Base-T RJ-45 LAN Port |
Firmware Upgrade |
Upgrade firmware via TFTP |
Security |
MAC address filtering (AP Mode)
WEP encryption (64/128 bit)
Hide SSID in beacons, stations can not use "any" SSID (AP Mode) |
IP Auto-configuration |
DHCP client |
Management |
Web-based configuration |
|
Environment
|
|
Temperature Range |
0 to 55C (32F to 131F)- Operating
-20C to 80C(-4F to 176F)- Storage |
Humidity (non-condensing) |
5%~95% typical |
|
Physical Specifications
|
|
Dimensions |
125(L)mm * 108(W)mm * 31(H)mm
4.9 (L)in* 4.3(W)in * 1.2(H)in |
Weight |
350 g (0.8 lb.) |
|
| |
